Solutions for the professional end-user.
Do you work smart? Do your employees and customers? Working smart is about choosing the best solution for the job and then executing the project safely. All polyurethane foam products contain diisocyanates. These chemicals may cause sensitization by inhalation and skin contact. For this reason, when using any low-pressure polyurethane foam, we recommend following a safety program, including wearing proper personal protective (PPE) equipment. Read the information below to learn how to Work Smart.
It is the individual employer’s responsibility to create and utilize a certified respiratory program. To learn how to create this program, visit www.osha.gov.
Required respirators should be NIOSH approved, fit tested and training must be provided before use. ICP Adhesives & Sealants recommends utilizing one of the following low-pressure two-component foams:
Please read the Safety Data Sheet (SDS), Technical Data Sheet (TDS), Operating Instructions and Handi-Foam® Product Stewardship Guidelines prior to using our products. SDS, TDS and Operating Instructions for our products can be accessed through our Product & Tech Data Finder.
All of our products are for professional use only. For further information, see the product specific SDS (Section 7), TDS, and Operating Instructions. See the Handi-Foam® Product Stewardship Guidelines for detailed instructions about Safe Handling, Use (Section 1), and for the Ventilation Plan Guidelines (Section 7).
Storage and disposal procedures vary by product formulation. See the product specific SDS (Section 13), TDS, Operating Instructions and Handi-Foam® Product Stewardship Guidelines (Section 5) for detailed instructions on storage and disposal. Product should be disposed of in accordance with applicable federal, state and local regulations. Check with your local waste service for guidance.
SDS, TDS and Operating Instructions for our products can be accessed through our Product & Tech Data Finder.